|
|
|
Vehicle: 2002-2003 Subaru WRX Installation Time: 1 Hour 12 Minutes Difficulty: 6/10 Required Tools: Flat Head Screw Driver 8mm Deep Socket 10mm Socket Ratchet Clip popper |
Safety Information: Please read our safety information page before attempting any of the steps in this guide.
Terms of Use: By using this website you signify that you have read and agree to be bound by our Terms of Use.
*Clicking on an article below will expand the article for reading. Clicking the article again will collapse it. You can also use the section index above to automatically expand an article and scroll to the beginning of it.
| Part 1: Battery Disconnect | Time: 3 Minutes Difficulty: 1/10 |
| Part 2: Brake Light Assembly Removal | Time: 18 Minutes Difficulty: 5/10 |
| Part 3: Rear Bumper Removal | Time: 15 Minutes Difficulty: 6/10 |
| Part 4: Rear Bumper Install | Time: 15 Minutes Difficulty: 6/10 |
| Part 5: Brake Light Assembly Install | Time: 18 Minutes Difficulty: 5/10 |
| Part 6: Battery Connect | Time: 3 Minutes Difficulty: 1/10 |
