Part 1: Front Grill Removal

Time: 5 Minutes   Difficulty: 3/10

Step 1: Push down on the four clips that secure the grill to body using a flat head screw driver. Pull the grill out as you disconnect each on so that the clips don't re-connect.

Step 2: Remove the two clips that secure the grill to the plastic brackets using a flat head screw driver.

Step 3: Remove the grill.

Click here for tips, tricks and discussion of this article.

Part 2: Front Bumper Removal

Time: 20 Minutes   Difficulty: 6/10

Step 1: Remove the headlight side covers by removing the three clips from each side.

Step 2: Remove the clip that secures the mudguard to the bumper and fold back the mud guard.

Step 3: Remove the clip that secures the bumper to the fender.

Step 4: Disconnect the fog light connectors

Step 5: Remove the seven clips on that secure the top of the bumper.

Step 6: Remove the three clips that secure the bottom of the bumper.

Step 7: Remove the front bumper.

Click here for tips, tricks and discussion of this article.

Part 3: Front Bumper Beam Removal

Time: 10 Minutes   Difficulty: 5/10

This article is currently being written and will be available soon.

If you'd like to add to the required tools, difficulty, approximate time, steps, or pictures for this article please visit the article's forum page or visit the content submission forum.

Part 4: Front Bumper Beam Install

Time: 10 Minutes   Difficulty: 5/10

This article is currently being written and will be available soon.

If you'd like to add to the required tools, difficulty, approximate time, steps, or pictures for this article please visit the article's forum page or visit the content submission forum.

Part 5: Front Bumper Install

Time: 20 Minutes   Difficulty: 6/10

Step 1: Install the front bumper

Step 2: Remove the clip that secures the mudguard to the bumper and fold back the mud guard.

Step 3: Install the seven clips that secure the top of the bumper to the body.

Step 4: Install the three clips that secure the bottom of the bumper to the bumper beam.

Step 5: Install the clips that secures the bumper to the fenders. Bull the mud guard back and install the clip.

Step 6: Connect the fog light connectors.

Step 7: Secure the headlight side covers by installing the three clips to each side.

Click here for tips, tricks and discussion of this article.

Part 6: Front Grill Install

Time: 5 Minutes   Difficulty: 3/10

Step 1: Install the front grill and push the bottom so that the two clips secure to the plastic brackets.

Step 2: Line up the clips to the plastic clips and push the grill so that it secures to the body.

Click here for tips, tricks and discussion of this article.